Press Control for Argus

Submitted by Product Manager on 7 September 2010 - 10:52am
pRegister

Automatic register pre-setting and control (Close loop) Module

Using printed target and a communication link to the press, pRegister closes the loop and automatically sets the color plates into registration.
  • Works with CI Flexo presses and supports jobs up to12 colors.
  • Setup is simple, fast and easy to use.
  • pRegister range of operation resides between a very large initial mis-register error to a fine accuracy, which is achieved very fast while reducing setup time and related waste.

Benefits

  • Integral part (option) of the PrintVision platform  - One System for AIS & Register Control
  • Automatic & Fast Register Pre setting During Make ready
  • High system accuracy: 15 microns (Digital presses)
  • Material waste reduction
  • Faster make-ready  -Fast Change Over
  • Increased press utilization

 
iReg

Semi-automatic registration make ready for Flexo CI

Any existing printed element on the web can be used for fast registration (eg. micro dots for plate mounting, registration crosshairs, color patches etc…). Stop the press, click and go – the print is in register!

  • Performed offline while the press is stopped
  • Utilize any existing graphic print elements 
  • Support existing plate stock
  • Included in pRegister optional module

 
Presco 

Automatic Plate & Anilox Pressure pre-setting & control for CI Flexo press

Using small color targets Presco closes the loop and determines plate & anilox positions, while automatically and simultaneously bringing plates & anilox to optimal pressure.

  • Presco dramatically reduces the pressure setup time & material waste.
  • Presco setup is simple, fast & easy to use.
  • Innovative parallel pressure control process  All plates (colors) at once, using pressure targets
  • Can be done at higher speeds - shortening setup time
  • Cost effective pressure solution

 
InterPro

The InterPro, working in conjunction with the AVT pRegister register control and
Presco pressure control modules, utilizes unique, sophisticated communication
Interface protocols to control supporting CI flexo presses. This enables the AVT
platform to become an integrated and intimate part of the press, resulting in fast
Register and pressure setup and in an automated press control process.


 
The InterPro supports the AVT pRegister and Presco combined package and it is
an add-on module to the PrintVision/Jupiter and PrintVision/Argus automatic
Inspection platforms.

  • Faster registration and pressure make ready
  • Saves even more  setup material & time
  • Easy to use
  • Fully automated process

 
AconPro

The AconPro is a customized version of the InterPro technology, and it is specially
developed for Comexi presses.

The AconPro supports the AVT pRegister & Presco combined package and it is add-on module to the PrintVision/Jupiter &
PrintVision/Argus automatic inspection modules.
 
Cingular Dot2

The AconPro Cingular Dot2 is part of the new Generation register and Pressure Automatic Pre-setting solution. Using only one small dot, the AVT system automatically adjusts the optimal Registration and Pressures of the press.

  •  Minimal target space required
  • Fast process,  lower make-ready  waste l
  • Very easy to use –fully automated process
  • Flexible target location in print
  • Simple preparation process for plate makers